By continuing your navigation on this site, you must accept the use and the writing of Cookies on your connected device.

close

Filter By

Length

Thread

Square type

Condition

Brand

Price

  • €2.00 - €80.00

Gears number

Material

  • €2.00 - €80.00

There are 20 products.

Active filters

Showing 1-18 of 20 item(s)

The fixie crankset corresponds to all of the components set in motion by the cyclist by means of the pedals screwed on the cranks fixed on the axle of the bottom bracket.

The single chainring screwed on the right crank transmits the force in the chain which drives the fixed sprocket of the rear wheel.

Features and choice of a fixie crankset:

The crankset of a fixie consists of a single chainring, the number of teeth of which allows to obtain the desired gear ratio. You will find in our article "table and calculation of a gear ratio or bicycle development" some advices and indications allowing you to define and identify the gear ratio corresponding to your needs and your morphology.

Here are some examples of criteria for choosing a fixie crankset:

  • crank length
  • type of thread to fix the pedals
  • standard for fixing the cranks on the bottom bracket axle (square, with keys, ...)
  • type of bottom bracket thread for its assembly in the frame of the fixie
  • crank material
  • color
  • the number of teeth on the chainring (this component is interchangeable for a gear change)

What brands of fixie cranks are there?

Some brands are specialized in the design and manufacture of parts and accessories for fixie and therefore crankset for fixie bikes Extra + or BLB are the best known brands.

How to maintain your fixie crankset?

In order to avoid seizing and the risk of squeaking of the fixie crankset, it is necessary to apply grease in the threads of the tapped holes in the cranks for fixing the cranks and on the areas of the fixie bottom bracket axle in contact with the cranks.

The chainring of the fixie crankset which is in contact with the chain, it is necessary to degrease it regularly in order to remove the rest of grease and other pollutants stuck on the teeth. Lubrication using a special bicycle lubricant of the chain and chainring teeth is essential in order to limit friction in the chain and the chainring of the fixie crankset.

Inspection criteria for a used fixie crankset:

All the parts and accessories in second hand condition offered in our shop are rigorously controlled in order to estimate their level of wear and their working condition.

Here are the checkpoints we apply in the case of a fixie crankset:

Fixie cranks:

  • visual inspection
  • check the thread of each crank for the assembly of the pedals
  • checking the interface for fixing the cranks on the bottom bracket axle
  • control of each fixing point of the chainring
  • chainring inspection

Bottom bracket and axle for fixie :

  • visual inspection
  • checking the bottom bracket axle mounting interface with each of the cranks
  • check the thread of each end of the fixie bottom bracket
  • inspection of the bottom bracket thread to screw into the fixie frame
  • bearing clearance check
  • checking the axle length and the housing width

These observations allow us to determine a score corresponding to the general state of wear of the fixie crankset measured on a scale from 0 (for parts) to 10 (new in its packaging).

Components in addition to a fixie crankset:

We offer many drivetrain parts for fixie in addition to the fixie crankset such as pedals, chains or fixed gears from the biggest brands, available in stock.

New parts come from clearance, they are offered at the best price, in limited quantities.