Brake Authority Magura Marta 2009 brake pads type B

Brake Authority BA4042B brake pads

Brake Authority BA4042B brake pads, specially designed for the Magura Marta (2009) — reliable performance, smooth braking, and optimized lifespan. Perfect for demanding cyclists on MTB / all-mountain rides and technical trails.

Compatibility

• Compatible model: Magura Marta 2009 (original mountain/all-mountain caliper).

• Manufacturer reference: BA4042B (verify your caliper number before ordering).

• Note: May not fit later Marta revisions — check pad thickness and fit before installation.

Technical specifications

• Pad type: High-performance resin/organic (smooth modulation and low noise).

• Initial thickness: ~4.0 mm (pad + backing plate).

• Backing plate: Reinforced steel, anti-deformation.

• Finish: Chamfered and machined to reduce vibrations and avoid local overheating.

• Attachment: Retaining spring + safety pin (ready to install).

• Operating temperature: Designed for road/trail/MTB use — effective at typical riding temperatures.

• Weight (pair): Lightweight to reduce unsprung mass.

• Safety certification: Tested under cycling conditions (Brake Authority quality control).

Features & benefits

• Progressive heat build-up: Excellent modulation for controlled braking without jerks.

• Low noise: Resin formula minimizes squealing and vibration on the rotor.

• Even wear: Consistent pad wear helps protect rotor surface.

• Easy installation: Pads designed to fit Magura Marta 2009 calipers — simple instructions.

• Wet condition performance: Formulation limits brake fade in muddy or rainy conditions.

• Low maintenance: Minimal bedding-in required (bedding recommended for optimal performance).

Installation & bedding recommendations

1. Remove wheel and caliper if needed.

2. Remove old pads and clean caliper and pistons (avoid greasy degreasers on pads).

3. Install BA4042B in correct orientation with safety pin.

4. Reinstall wheel and check rotor/caliper alignment.

5. Bedding-in: Perform 10–15 progressive stops from low speed to full stop; avoid prolonged emergency braking during initial rides.

6. Check for vibrations and adjust alignment if needed.

Maintenance & safety

• Regularly check pad thickness; replace when pad material reaches 0.5–1 mm.

• Avoid contamination by oil, grease, or brake fluid; contaminated pads must be replaced.

• When replacing, inspect rotor condition (flatness, minimum thickness) and bleed hydraulic system if necessary.

• Follow Magura torque and procedure guidelines for caliper maintenance.

Recommended use

• Ideal for: All-mountain MTB, trail, and technical rides. Also suitable for demanding urban and gravel bikes.

• Environment: Effective in dry and wet conditions; for long downhill or intense use, consider sintered pads for higher heat resistance.

Need a pair for your Magura Marta 2009? Order the BA4042B now and enjoy precise, quiet braking. If you’re unsure between resin and sintered pads, tell us your usage (long descents / mixed use) and we’ll recommend the best option.