By continuing your navigation on this site, you must accept the use and the writing of Cookies on your connected device.

close

Filter By

Brand

Condition

There are 17 products.

Active filters

Showing 1-17 of 17 item(s)

A road bike pump is an essential tool used to inflate the tires of a road bike. 

It serves the primary function of adding air to the tires and ensuring they are properly inflated for optimal performance and safety while riding.

The main components of a road bike pump typically include a cylindrical barrel, a handle, and a nozzle or head that attaches to the valve on the bike tire. There are different types of pumps available, including floor pumps, mini pumps, and CO2 inflators. However, the basic function remains the same across these variations.

Here's how a typical road bike pump works:

Prepare the pump :

Before using the pump, ensure that it is properly assembled and ready for use. This may involve attaching the hose or nozzle to the pump barrel and ensuring a secure connection.

Select the correct valve head :

Road bike tires usually have Presta valves, which are long and slender, or Schrader valves, which are wider and more common on other types of bikes. Some pumps have dual heads that can accommodate both types of valves, while others may require an adapter or have separate heads for each valve type. Choose the appropriate valve head for your bike.

Attach the pump head to the valve :

Place the pump head onto the valve by aligning it correctly with the valve stem. Some pump heads require you to unscrew a small cap on the valve before attaching, while others have a lever or locking mechanism to secure the connection.

Pumping :

Hold the pump steady and start pumping the handle up and down or back and forth, depending on the pump design. This action creates air pressure within the pump barrel, which is then transferred to the tire through the attached hose or nozzle.

Inflate the tire :

Continue pumping until you reach the desired tire pressure. It's important to refer to the recommended tire pressure, which is usually indicated on the tire sidewall or in the bike manufacturer's guidelines. Most road bike tires require high pressure, typically ranging from 80 to 120 PSI (pounds per square inch).

Detach the pump :

Once you've reached the desired tire pressure, carefully detach the pump head from the valve. Some pumps have a quick-release mechanism, while others require unscrewing or unlocking the connection.

Check the pressure :

Use a tire pressure gauge to verify the tire pressure after inflation. This helps ensure accuracy and allows you to make any necessary adjustments.

By using a road bike pump regularly and keeping your tires properly inflated, you can enhance your riding experience. Properly inflated tires offer better rolling efficiency, improved handling, and reduce the risk of flats or damage from impacts. It's recommended to carry a portable mini pump or CO2 inflator during rides to address any sudden loss of air pressure or emergencies on the road.